Preloader

Item Tag: Not Applicable

Uni-Solar PVL-128 UL LISTED Carton 30 128W Solar Panels -Solder Points No Cables

Uni-Solar PVL-128 UL LISTED Carton 30 128W Solar Panels -Solder Points No Cables Uni-Solar PVL-128 Carton of 30 *UL LISTED* Flexible Solar Panels – 3840 Watts Total – 128W 24V Each with Bottom Facing Solder Points. We include free MC4 Cables and Junction box for DIY installations. Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. They are also Category 3 (130 MPH) Hurricane uplift resistant and installed with no hardware. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Electrical Stats: Maximum Power (Pmax): 128 Watts Nominal Operating Voltage: 24 Volts Max Power Voltage (Vmpp): 33 Volts Max Power Current (Impp): 3.88 Amps Open Circuit Voltage (Voc): 47.6 Volts Short Circuit Current (Isc): 4.8 Amps Physical Stats: Panel Dimensions (Feet): 18 long x 1.29 wide Panel Dimensions (Inches): 216 long x 15.5 wide x 0.2 thick Panel Weight: 16 Pounds Electrical Connectors: None: Solder Points on bottom of panel Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.  UNISOLAR PVL-128 Solar Power Amorphous Flexible PV Panels – YouTube Video will open in a new window [isdntekvideo]   Condition: New These brand new made in USA solar panels are packed and stored in the factory carton of 30 panels. The Unisolar manufacturing and distribution facility was liquidated in 2012 and these panels came direct from Unisolar. We do have various brochures and installation guides produced by Unisolar available we can offer you if requested. Uni-solar peel and stick flexible panels are no longer made and are getting more rare by the day.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Explore More

Uni-Solar PVL-128 Carton 30 UL LISTED 128W 24V Solar Panels – 3840W – 4″ Wires

Uni-Solar PVL-128 Carton 30 UL LISTED 128W 24V Solar Panels – 3840W – 4″ WiresUni-Solar PVL-128B 3840 Watt Carton of 30 128 Watt Solar Panels with Bottom Facing 4″ Wires. We include free MC3 Cables and Junction box for DIY installations. Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. They are also Category 3 (130 MPH) Hurricane uplift resistant and installed with no hardware. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Electrical Stats: Maximum Power (Pmax): 128 Watts Nominal Operating Voltage: 24 Volts Max Power Voltage (Vmpp): 33 Volts Max Power Current (Impp): 3.88 Amps Open Circuit Voltage (Voc): 47.6 Volts Short Circuit Current (Isc): 4.8 Amps Physical Stats: Panel Dimensions (Feet): 18 long x 1.29 wide Panel Dimensions (Inches): 216 long x 15.5 wide x 0.2 thick Panel Weight: 16 Pounds Electrical Connectors: None: Bare, 4-inch wires on bottom of panel (RED and BLACK for positive and negative). We include free MC3 Cables and Junction box for DIY installations. Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.  UNISOLAR PVL-128 Solar Power Amorphous Flexible PV Panels – YouTube Video will open in a new window [isdntekvideo]   Condition: New Brand New Carton of 30 solar panels. FREE MC3 Cables and Junction box for DIY installations included for every panel. These panels have bottom-facing 4-inch wires for connections below the panel. Shipping shown is for freight shipping to your nearest terminal for you to pickup. Please view our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Explore More

Uni-Solar PVL-116 116W 24V Flexible Amorphous Solar Panel w/MC3 Cables UL LISTED

Uni-Solar PVL-116 *UL LISTED* 116 Watt 24 Volt Brand New Flexible Amorphous Solar Panel with MC3 Connectors. These panels are just over 16 feet long. Electrical Stats: Maximum Power (Pmax): 116 Watts Nominal Operating Voltage: 24 Volts Peak Power (Volts): 30 Volts Peak Power (Amps): 3.88 Amps Open Circuit Volts: 43.2 Volts Short Circuit Amps: 4.8 Amps Physical Stats: Panel Dimensions (Feet): 16.4 long x 1.29 wide Panel Dimensions (Inches): 197.3 long x 15.5 wide x 0.2 thick Panel Weight: 15.5 Pounds Electrical Connectors: MC3 Connectors – Push / Pull apart Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate

Explore More

Uni-Solar Finished L-Strip Amorphous Solar Cells 7.5W 1.6V – Box of 100 Total

Uni-Solar Finished L-Strip Amorphous Solar Cells 7.5W 1.6V – Box of 100 Total Uni-Solar Finished L-Strip AA 7.2W 1.6V Amorphous Solar Cell PVL DIY – Box of 100 This is a box of 100 Solar Cells with Tabs that Uni-Solar manufactured to assemble into the ePVL Series solar panel. This box of solar cells came from the main manufacturing plant in Michigan during the 2012 liquidation of United Solar Ovonic the parent company who made the Uni-Solar PVL and ePVL solar panels. These cells were used to manufacture the ePVL or enhanced PVL solar panels that came in various power configurations up to 144 watts. These cells are made on Stainless Steel base coated with Amorphous Silicon which products an efficiency of between 6 and 7 percent.   Maximum Power (Pmax): 7.5 Watts [Average PMax of lowest Average Pmax box] Max Power Voltage (Vmpp): 1.60 Volts Max Power Current (Impp): 3.875 Amps Open Circuit Voltage (Voc): 2.05 Volts Short Circuit Current (Isc): 5.397 Amps [Average Isc of lowest Average Pmax box] Cell Size is 14″ L x 10″ W (35.56 cm L x 25.4 cm W) Box of 100 weighs approximately 32 Pounds We have many lots of these cells and they may have cosmetic blemishes that are different from the 10 cells shown in the photos.   Condition: New These solar cells are raw (meaning non-encapsulated) and have no weather proofing and will need to be encapsulated from moisture. In comparison to CIGS solar cells these cells can withstand weather better and we have actually left a cell outside for over a year through rain and heat and it still produces good power. I must say these are very robust cells for do-it-yourself applications. The output of 1.6 volts is about 3 times the voltage of a standard solar cell. So when combining them to create a 6-volt output to charge USB devices or 12-volt output to charge your typical car battery you will need to connect 1/3 the number of cells. Please view our photos and contact us with any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Explore More

Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points – No Cables

Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points – No Cables Uni-Solar PVL-24 5V 24W Flexible Amorphous 3-Foot Long Solar Panel Battery Charger. Combine 3 of these panels in series to increase voltage for charging 12 Volt Batteries. No Cables or Junction Box Included DIY. Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer’s guidelines. Designed for 5V USB voltage charging (No USB port Included). Combine multiple panels to increase voltage as needed for various battery configurations. Small form factor for custom Vehicle solar charging. These 36 inch long 3 cell panels are the shortest PVL Series panels Unisolar Made allowing multiple panels to be connected to fit small roof surface applications such as Golf Carts, VW Vans and Experimental Electric Vehicles. Panels are roll-able to about 6 inches in diameter to take hiking and backpacking. Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18″ x 2″ metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent. Electrical Stats: Maximum Power (Pmax): 24 Watts Nominal Operating Voltage: 5 Volts (approximately) Max Power Voltage (Vmpp): 4.6 Volts Max Power Current (Impp): 5.2 Amps Open Circuit Voltage (Voc): 6.1 Volts Physical Stats: Panel Dimensions (Feet): 3 long x 1.29 wide Panel Dimensions (Inches): 36 long x 15.5 wide x 0.2 thick Panel Weight: 2.75 Pounds Electrical Connectors: None: Solder Points on top of panel Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.  UNISOLAR PVL-24 Solar Power Amorphous Flexible PV Panels – YouTube Video will open in a new window [isdntekvideo]   Condition: Open Box This new open box panel has top-facing solder points for connections above the panel. When 3 of these panels are combined in series they will produce a good voltage for charging 12 Volt Batteries. We are not including any cable or junction boxes but the solder points are easy to access and will allow you to attach your own cable by soldering.Please review our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Explore More

SUNAPEX Portable 10W Solar Battery Charger Maintainer Flexible Solar Panel Kit

Get ready to harness the power of the sun with this SUNAPEX Portable 10W Solar Battery Charger Maintainer Flexible Solar Panel Kit. Designed for those who are always on the go, this kit features a flexible and portable solar panel that allows you to charge your devices wherever you are. With a brand like SUNAPEX, you can trust that this solar panel kit is made with quality materials and is built to last. Its pliability allows for easy storage and transportation, while its features like portability make it a must-have for any outdoor enthusiast. Whether you're camping, hiking, or simply out for a day trip, this solar panel kit will help keep your devices charged and ready to use.

Explore More

Uni-Solar Finished L-Strip 7.5W 1.6V AA Amorphous Solar Cells DIY Pack of 10

Uni-Solar Finished L-Strip 7.5W 1.6V AA Amorphous Solar Cells DIY Pack of 10Uni-Solar Finished L-Strip 7.5W 1.6V AA Amorphous Solar Cells DIY Pack of 10 This is a box of 10 Solar Cells with Tabs that Uni-Solar manufactured to assemble into the ePVL Series solar panel. This box of solar cells came from the main manufacturing plant in Michigan during the 2012 liquidation of United Solar Ovonic the parent company who made the Uni-Solar PVL and ePVL solar panels. These are super flexible cells which were made on a stainless steel substrate. Unisolar made the PVL and ePVL or enhanced PVL solar panels that came in various power configurations up to 144 watts. These cells are made on Stainless Steel base coated with Amorphous Silicon which products an efficiency of between 6 and 7 percent. Electrical States (each cell): Maximum Power (Pmax): 7.5 Watts [Average PMax of lowest Average Pmax box] Max Power Voltage (Vmpp): 1.60 Volts Max Power Current (Impp): 3.875 Amps Open Circuit Voltage (Voc): 2.05 Volts Short Circuit Current (Isc): 5.397 Amps [Average Isc of lowest Average Pmax box] Cell Size is 14″ L x 10″ W (35.56 cm L x 25.4 cm W) Box of 10 weighs approximately 5 Pounds We have many lots of these cells and they may have cosmetic blemishes that are different from the 10 cells shown in the photos. Please view our photos and contact us with any questions. These solar cells are raw (meaning non-encapsulated) and have no weather proofing and will need to be encapsulated from moisture. In comparison to CIGS solar cells these cells can withstand weather better and we have actually left a cell outside for over a year through rain and heat and it stills produces good power. I must say these are very robust cells for do it yourself applications. The output of 1.6 volts is about 3 times the voltage of a standard solar cell. So when combining them to create a 6-volt output to charge USB devices or 12-volt output to charge your typical car battery you will need to connect 1/3 the number of cells.   Condition: New This pack of 10 raw solar cells are high quality brand new and pulled from an original manufacturer box of 100. We have many lots of these cells and they may may have cosmetic blemishes that are different from the 10 cells shown in the photo set. Please view our photo set and contact us with any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Explore More

Solopower SP1 60W 7-ft / 86.5″ Flexible Thin CIGS Solar Panel with Solder Tabs

Solopower SP1 60W 7-ft / 86.5″ Flexible Thin CIGS Solar Panel with Solder TabsSolopower SP1 60 Watt 7-Foot Long (86.5″) Flexible Thin CIGS Solar Panel with Solder Points / Metal Solderable Tabs Panels will ship with a FREE GIFT of an unattached pair of MC4 cables with pre-attached junction boxes for user installation. The panel produces electricity out of both tabs without junction boxes and cables installed, but some end users find the MC4 cables handy for their varioussetups. Electrical Characteristics Peak Stats at 100% Factory-Perfect Simulated Sun Maximum Power: 60 Watts Approximately Maximum Voltage at Pmax: 20 Volts Maximum Power Current: 3.5 Amps Open Circuit Voltage: 31 Volts Short Circuit Current: 4 Amps Physical Characteristics Length 7.2 Feet (86.5 in / 2.197 m) Width 1.3 Feet (15.7 in / 0.398 m) Thickness 0.1 in / 2.0 mm Rolled Diameter: 10-12 Inches Weight 4.6 lbs / 2.1 kg Roof Load From Module 0.49 lbs/ft2 / 2.4 kg/m2 Connectors: Electrical solder point connections have approximately 1″ – 2″ of metal wire and are on opposite ends of the solar panel   Condition: New This is a unused Solopower solar panel which was manufactured at the San Jose California facility. It came from their QC department and has been tested to output voltage. Most of these panels have writing on them as they were being used for testing. We have had multiple units in stock and the unit shipped may vary from the unit photographed. Please view our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Explore More